PIB COMPOUND

By


Product Data Sheet

POLYISOBUTYLENE ADDITIVE ( PIB COMPOUND)

HS CODE:  39022000
CAS NO:    9003 – 27 - 4
 
Polyisobutylene Additive (PIB Compound) is a based on a special blend of Polyisobutylene with base polyethylene, elastomeric olefins and active additives. The composition is used as a adhesion promoter (cling agent) to produce stretch wrap films from LLDPE or LDPE, the high molecular weight Polyisobutylene content in the base polyethylene and matrix achieves the excellent stickiness property in the dry granules, it is dry free flow granules

Polyisobutylene Additive (PIB Compound) is available in the granule form which is very easy to handle as against the direct dosing of Polyisobutylene liquid which is very difficult & tedious to handle due to high viscosity. Our Polyisobutylene Additive distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to wrap the packages together with proper grip.

Polyisobutylene Additive (PIB Compound) is designed to produce stretch wrap films from LLDPE, LDPE or any other Nonslip Polyolefin’s for the applications of Pallet wrap and Silage wrap. It can be used on either blown film line or cast film process. Polymers used with Polyisobutylene Additive must not contain any Anti blocking additive or slip agent as this will prevent the migration of cling additive on the films. Migration time for the good cling properties is usually 24 to 72 hours.

TECHNICAL SPECIFICATIONS
Chemical Name ( Global Name )
  Polyisobutylene Additive  (PIB Compound)
Appearance
Lightly Powdered Translucent Dry Pellets
Grade Name
PIB60,  PIB66,  PIB70
Active adhesive Content 
60%,    66%,    70%     (+/- 1 %)
Structure Resin
14%,    10%,    08%     (+/- 1 %)
Carrier resin
14%,    10%,    08%     (+/- 1 %)
Granulating Agent Resin
04%,    05%,    05%     (+/- 1 %)
Formulated  Additive 
04%,    05%,    05%     (+/- 1 %)
Energetic Ingredient 
04%,    04%,    04%     (+/- 1 %)
Compatibility
LLDPE, LDPE, EVA ETC.
Loose Bulk Density
0.45 ~ 0.50 gms/cm³
Specific Gravity
0.910 ~ 0.920 gms/cm³
Soluble fraction in Xylene @ 25⁰C W/W%
75 max
Moisture (at works)
<0.5%

We suggest the following addition level :

To get the best results in case of extrusion, it is advisable to mix the material thoroughly before feeding in a hopper


Blown Film Line:

è PIB Additive, use in monolayer blown film line approx 5 to 7% should be added to with resin mix

è PIB Additive, use in multilayer blown film lines are usually added to the skin layers only. Addition level
     Of depends on which layer is used and the thickness of layer, it can be use approx 3 to 5%

Cast Film Line:

è PIB Additive, use in monolayer cast film line approx 2 to 4% should be added to with resin.
  
è PIB Additive, use in multilayer cast film lines are usually added to the skin layers only. Addition level
     Of depends on which layer is used and the thickness of layer, it can be use approx 1 to 2%

Note: The above dosages are for guidance only. Actual condition may vary from film to film, process to process and also upon the thickness of the film and its specific uses.

Blown Films Application : 03 to 07%
Cast Film Application : 01 to 02%

                                     

Application:
Polyisobutylene Additive (PIB Compound )  is mainly used in LLDPE / LDPE self adhesive Stretch Film Either both plant:
Blown Film Plant  çè  Cast Film Plant
          
èMachine Stretch Film  èStretch Silage Film  èColor Stretch Film  èPre Stretch Film
Packing & Storage:
Polyisobutylene Additive (PIB Compound) is available in the packing of 25 kg. paper  laminated moisture proof woven sack bag. It is also available in 22.5 Kg. Heavy duty corrugated Box Packing. Keep the product in cool & dry place with good ventilation. Away from the direct sunlight, high temperature, rain pour and not under heavy loads.
Disclaimers:
All information set forth herein is based on our present state of knowledge and is intended to provide general notes regarding products and their uses. It should not therefore be construed as a guarantee of specific properties of the products described or their suitability for a particular application. Because conditions of product use are outside TECHNOFILL ADDITIVES’s control and vary widely, user must evaluate and determine whether A TECHNOFILL ADDITIVES product will be suitable for user’s intended application before using it. The quality of our products is warranted under our General Terms and Conditions of Sale as now are or hereafter may be in force. Technical information, test data, and advice provided by TECHNOFILL ADDITIVES personnel are based on information and tests we believe are reliable and are intended for persons with knowledge and technical skills sufficient to analyze test types and conditions, and to handle and use raw polymers and related compounding ingredients.

Plot No: 52, Brushellz Industrial Park, Opp. GSFC Nagar Gate, Behind Toyota Showroom, Near N.H No: 08, Dashrath, Vadodara, Gujarat, 391740, INDIA
Contact No: +91 265 2241033 +91 7202050333, +91 7202060333
Email: technofillllp@gmail.com,  info@technofilladditives.com
Web: www.technofilladditives.com


Comments

Post a Comment

PIB COMPOUND

PIB MASTERBATCH

By
Image
Product Description: Polyisobutylene Additive (PIB Masterbatch) i s a based on a special blend of Polyisobutylene with base polyethylene, elastomeric olefins and active additives. The composition is used as a adhesion promoter (cling agent) to produce stretch wrap films from LLDPE or LDPE, the high molecular weight Polyisobutylene content in the base polyethylene and matrix achieves the excellent stickiness property in the dry granules, it is dry free flow granules Polyisobutylene Additive (PIB Masterbatch) is available in the granule form which is very easy to handle as against the direct dosing of Polyisobutylene liquid which is very difficult & tedious to handle due to high viscosity. Our Polyisobutylene Additive distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to wrap the packages together with proper grip. Polyisobut...
PIB COMPOUND

Polymer’s Processing Additives Masterbatch ( PPA MB )

By
Image
Product Description: PPA Masterbatch can be used to improve the processing performance of all types of polyolefins, including  LLDPE, LDPE, HDPE and PP by extrusion process. Polymers melt fracture is generally the surface imperfection seen as a regular surface with ridges running perpendicular to the extrusion direction especially in films, which is also known as “Shark Skin Effect” Recommendations for masterbatch Preparation should not have PPA content above 5% since this can lead to poor dispersion. A level around 2% is desirable. The table below can be used to determine the percentage of masteratch to be included in the final mixture to obtain the required level in PPM Addition Rate – PPM Level PPA9005 PPA9004 PPA9003 PPA9002 PPM Level Dosing   0.5% Dosing   0.6% Dosing   0.7% Dosing   0.8% 250 ...
PIB COMPOUND

Technofill Additives

By
Image
Technoill Additives was founded in 2017 by Mr. Mandipkumar Madha with an experience of 12 years in the ield of PIB Compound & Additive Masterbatches manufacturing. Aimed to provide all types of Additive Masterbatches & Polymer Modiier Compound to polymer industries. Our company has served national as well International Clients providing them satisfactory results in their production. Mission: Our mission is to exceed customers expectations in terms of quality, delivery, and cost through continuous improvement and customer interaction. Vision: Our mission can be achieved through manufacturing exceptionally best products at very cost effective way through best R&D Team and most customer centric policies. Values: Act with honesty and integrity Treat people with respect Conduct all business lawfully Accept individual and corporate responsibility Strive for customer satisfaction Improve and innovate continuously Never be wasteful Always work...
PIB COMPOUND

PIB COMPOUND

By
Image
Product Description: PIB Compound i s a based on a special blend of Polyisobutylene with base polyethylene, elastomeric olefins and active additives. The composition is used as a adhesion promoter (cling agent) to produce stretch wrap films from LLDPE or LDPE, the high molecular weight Polyisobutylene content in the base polyethylene and matrix achieves the excellent stickiness property in the dry granules, it is dry free flow granules PIB Compound  is available in the granule form which is very easy to handle as against the direct dosing of Polyisobutylene liquid which is very difficult & tedious to handle due to high viscosity. Our Polyisobutylene Additive distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to wrap the packages together with proper grip. PIB Compound  is designed to produce stretch wrap ...
PIB COMPOUND

Mulch Film Masterbatches

By
Image
Mulch Film Masterbatches è Provides favorable soil moisture for development of roots and plants because of its uniform dispersion è Give protection against sulfur or other chemical based pesticides è Protect the film from adverse effect of viral, fog etc è Give protection against normal insecticides è Strong resistance against pesticides. è Direct contact of pesticides with the film should be avoided. @ Recommended dosage of each and every application follow necessary for long lasting life 
PIB COMPOUND

Anti Block Masterbatch

By
Image
Anti Block Masterbatch: L is a highly concentrated Slip & Antiblock masterbatch which specifically designed to use with Polyolefins. It provides an optimal mix between Slip agent and Antiblock agent, achieving a synergized effect from both substances. The result is a significant improvement in openability while yielding higher cost efficiency Physical Property: Property Test Method                                                   Value Antiblock content TPE Method 15.0 % Slip content TPE Method 10.0% Melt index (190 oC, 2.16 kg) ASTM D1238 1.70g/10min Density ASTM D792 1.00...
PIB COMPOUND

UV ADDITIVES MASTERBATCH

By
Image
Product Description: TACHNOFILL ADDITIVES has developed a complete range of UV Additive Masterbatches, with selected heat and light stabilizers, for every polyolefin application, all Polymers products exposed to heat, light and oxygen, are subjected to degradation, the degradation process can be retarded and the useful life of plastic products prolonged,  by the addition of stabilizers in the polymer, the most important reason causing degradation of plastics is the Ultra Violate radiation of the sun. the energy carried by this radiation initiates or accelerates chemical reactions chain in the polymer's molecules, causing chain - scission and cross - linking. as a result, the plastic product is loosing its properties and becomes brittle. Special Features: è The careful selection and balanced formulation of different additives. è The excellent dispersion of the additives in the base resin. è Easy processing without affecting the me...
PIB COMPOUND