Antioxidant Masterbatch

By


Product Description:

Technofill additives formulated Antioxident Masterbatch on the basis of stearically hindered phenolic antioxidants that are properly dispersed in polyolefin's carrier, these masterbatches are responsible for protecting and retaining the gloss and mechanical properties of the end product.

It can be used  gel reductions or die lip build up control in polyethylene film extrusion, or process stabilisation in the case of polypropylene fibre production where careful control of the MFI is essential to ensure high quality trouble free production.
Long term colour and thermal stability can be enhanced by selecting the correct package of antioxidants.
In addition to stand alone masterbatches this systems can be used in multifunctional masterbatches such as in conjunction with UV Stabilisers and Processing Aids Masterbatches to offer both enhanced properties and cost effectiveness.


Features:
èLong term thermal stability .
èProtection against degradation of polymer during repeated processing.
èImprovement in ageing resistance-high temperature processing.
èExcellent dispersion.
èFormulated from phenolic antioxidants
èPrevents the degradation of products at high temperature
èMaintains the gloss and mechanical properties of product
èBetter stabilization of the polymer during processing
èEnhances the useful life of plastic product
èPrimary phenolic & secondary phosphate stabilizer packages
èProducts specifically designed for film and fiber producers
èProcess stabilizers to improve outputs
èFinished product stabilizers to enhance lifetime performance

Recommendation :

è Compatibility:          LD / LLDPE / Eva / PP
è Dosage:                   01% – 5%
[The above dosage are general guidance only, actual condition may vary depending on the raw material ,actual processing conditions & application requirement]

Technical Characteristics:

Physical Properties
Test Method
Unit
Typical Value
Melt Flow Index
ASTM–D-1238
Gm/10min.
02.00
Moisture Content
ASTM-C-25
ppm
400
Dispersion
Technofill Std.
Observation.
Satisfactory.
% ACTIVE CONTANT
Technofill Std.
%
15.00 %
% Energetic Additive 
Technofill Std.
%
01.50 %
Carrier Resin
LDPE / LLDPE

Applications:

The use of Antioxidants Masterbatch in polymer processing can offer better stabilization of the polymer during processing and also prolong its useful life in the end application:
(1)Pipes                        (2)Profiles                     (3) Films
(4)Tapes                       (5)Cables                      (6)Geotextiles
(7)Injection molded product                                 (8)Blow molded product
(9)Rotomoulded product

Storage:


Technofill Additives Slip Masterbatch is available in the packing of 25 kg, paper laminated and moisture proof woven sack bag. Keep the product in cool & dry place with good ventilation. Away from the direct sunlight and high temperature

Comments

Post a Comment

PIB COMPOUND

PIB MASTERBATCH

By
Image
Product Description: Polyisobutylene Additive (PIB Masterbatch) i s a based on a special blend of Polyisobutylene with base polyethylene, elastomeric olefins and active additives. The composition is used as a adhesion promoter (cling agent) to produce stretch wrap films from LLDPE or LDPE, the high molecular weight Polyisobutylene content in the base polyethylene and matrix achieves the excellent stickiness property in the dry granules, it is dry free flow granules Polyisobutylene Additive (PIB Masterbatch) is available in the granule form which is very easy to handle as against the direct dosing of Polyisobutylene liquid which is very difficult & tedious to handle due to high viscosity. Our Polyisobutylene Additive distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to wrap the packages together with proper grip. Polyisobut...
PIB COMPOUND

Polymer’s Processing Additives Masterbatch ( PPA MB )

By
Image
Product Description: PPA Masterbatch can be used to improve the processing performance of all types of polyolefins, including  LLDPE, LDPE, HDPE and PP by extrusion process. Polymers melt fracture is generally the surface imperfection seen as a regular surface with ridges running perpendicular to the extrusion direction especially in films, which is also known as “Shark Skin Effect” Recommendations for masterbatch Preparation should not have PPA content above 5% since this can lead to poor dispersion. A level around 2% is desirable. The table below can be used to determine the percentage of masteratch to be included in the final mixture to obtain the required level in PPM Addition Rate – PPM Level PPA9005 PPA9004 PPA9003 PPA9002 PPM Level Dosing   0.5% Dosing   0.6% Dosing   0.7% Dosing   0.8% 250 ...
PIB COMPOUND

Technofill Additives

By
Image
Technoill Additives was founded in 2017 by Mr. Mandipkumar Madha with an experience of 12 years in the ield of PIB Compound & Additive Masterbatches manufacturing. Aimed to provide all types of Additive Masterbatches & Polymer Modiier Compound to polymer industries. Our company has served national as well International Clients providing them satisfactory results in their production. Mission: Our mission is to exceed customers expectations in terms of quality, delivery, and cost through continuous improvement and customer interaction. Vision: Our mission can be achieved through manufacturing exceptionally best products at very cost effective way through best R&D Team and most customer centric policies. Values: Act with honesty and integrity Treat people with respect Conduct all business lawfully Accept individual and corporate responsibility Strive for customer satisfaction Improve and innovate continuously Never be wasteful Always work...
PIB COMPOUND

PIB COMPOUND

By
Image
Product Description: PIB Compound i s a based on a special blend of Polyisobutylene with base polyethylene, elastomeric olefins and active additives. The composition is used as a adhesion promoter (cling agent) to produce stretch wrap films from LLDPE or LDPE, the high molecular weight Polyisobutylene content in the base polyethylene and matrix achieves the excellent stickiness property in the dry granules, it is dry free flow granules PIB Compound  is available in the granule form which is very easy to handle as against the direct dosing of Polyisobutylene liquid which is very difficult & tedious to handle due to high viscosity. Our Polyisobutylene Additive distributes very uniformly over the entire film imparting the strength & tackiness properties to the film with self adhesive properties. And this property of the film helps to wrap the packages together with proper grip. PIB Compound  is designed to produce stretch wrap ...
PIB COMPOUND

Mulch Film Masterbatches

By
Image
Mulch Film Masterbatches è Provides favorable soil moisture for development of roots and plants because of its uniform dispersion è Give protection against sulfur or other chemical based pesticides è Protect the film from adverse effect of viral, fog etc è Give protection against normal insecticides è Strong resistance against pesticides. è Direct contact of pesticides with the film should be avoided. @ Recommended dosage of each and every application follow necessary for long lasting life 
PIB COMPOUND

Anti Block Masterbatch

By
Image
Anti Block Masterbatch: L is a highly concentrated Slip & Antiblock masterbatch which specifically designed to use with Polyolefins. It provides an optimal mix between Slip agent and Antiblock agent, achieving a synergized effect from both substances. The result is a significant improvement in openability while yielding higher cost efficiency Physical Property: Property Test Method                                                   Value Antiblock content TPE Method 15.0 % Slip content TPE Method 10.0% Melt index (190 oC, 2.16 kg) ASTM D1238 1.70g/10min Density ASTM D792 1.00...
PIB COMPOUND

UV ADDITIVES MASTERBATCH

By
Image
Product Description: TACHNOFILL ADDITIVES has developed a complete range of UV Additive Masterbatches, with selected heat and light stabilizers, for every polyolefin application, all Polymers products exposed to heat, light and oxygen, are subjected to degradation, the degradation process can be retarded and the useful life of plastic products prolonged,  by the addition of stabilizers in the polymer, the most important reason causing degradation of plastics is the Ultra Violate radiation of the sun. the energy carried by this radiation initiates or accelerates chemical reactions chain in the polymer's molecules, causing chain - scission and cross - linking. as a result, the plastic product is loosing its properties and becomes brittle. Special Features: è The careful selection and balanced formulation of different additives. è The excellent dispersion of the additives in the base resin. è Easy processing without affecting the me...
PIB COMPOUND